K944-D10
CC-Solver Set specific for CRG chassis with spindles pin D.10mm.
CC-Solver kit replaces the original bush and allows a specific adjustment for Caster and Camber.
Camber has a range of ± 4.2 ° with continuous adjustment; Caster has a range of ± 5.4 ° with steps of 1.8 °.
The benefit of this system, compared to the original, is the possibility to easily adjust Caster and the Camber, maintaining total independence from each other.
The spacer washers provided allow the perfect support on the spindle bearing at all inclinations, this considerably extends the life of the bearing itself.
The set of spacer washers provided, allows three frame height measurements: 0mm, +4mm, -4mm.
Spacers for heights + 2mm and -2mm are available as optional.
The installation of the kit is very simple and does not require modifications to the frame.
Camber has a range of ± 4.2 ° with continuous adjustment; Caster has a range of ± 5.4 ° with steps of 1.8 °.
The benefit of this system, compared to the original, is the possibility to easily adjust Caster and the Camber, maintaining total independence from each other.
The spacer washers provided allow the perfect support on the spindle bearing at all inclinations, this considerably extends the life of the bearing itself.
The set of spacer washers provided, allows three frame height measurements: 0mm, +4mm, -4mm.
Spacers for heights + 2mm and -2mm are available as optional.
The installation of the kit is very simple and does not require modifications to the frame.