Probes
KH031
Tire Temperature Sensors Kit
Tire Temperature sensors have been specifically designed to measure the surface temperature of tires, providing important info for chassis tuning, tire exploitation, and driver behaviour.
Our sensors, with a 35° Field of View, measure temperatures between -20 and 120°C and provide a 0-5V output signal.Read more
Our sensors, with a 35° Field of View, measure temperatures between -20 and 120°C and provide a 0-5V output signal.Read more
KH017
Kart brake/accelerator pedal position sensor
The accelerator/brake pedal position sensors represent a key support for kart drivers. They provide a precise indication of timing and intensity of braking/ acceleration. Which permits to understand if the driver has accelerated or braked at the right moment and with the correct strength. A very important fact to evaluate driver behavior and improve his performance.
Data can be acquired by MyChron5 connected to MyChron Expansion and analyzed on your PC.Read more
Data can be acquired by MyChron5 connected to MyChron Expansion and analyzed on your PC.Read more
KH020
MyChron Expansion channel multiplier improves MyChron5 and MyChron5 2T (and also MyChron4 and MyChron4 2T) performance, thanks to four additional channels and a further CAN bus connector.
Through this last connector the systems can be connected to LCU-One Lambda controller and SmartyCam HD (and to GPS and Data key for MyChron4 systems).
Thanks to its specific wirings, MyChron Expansion powers the systems and their peripherals with an external battery, avoiding internal battery consumption.Read more
Thanks to its specific wirings, MyChron Expansion powers the systems and their peripherals with an external battery, avoiding internal battery consumption.Read more
KH023
Exhaust gas power valve position sensor
Exhaust gas power valve sensor provides a very accurate indication of the exhaust gas valve* working, measuring its gap in mm. The sensor, which measures valve stroke until 20mm, samples RPM value that opens/closes the valve and all intermediate values too. Data are immediately visible on MyChron5 display: RPM/GasValv graph of the analyzed lap appears. With Race Studio Analysis software data of different laps can be compared on your PC. Closed valve position is auto-calibrated by the sensor. Thanks to this sensor, valve malfunctions are under control.
* The sensor is currently compatible with Rotax-type valves, used by the following engines: Rotax, Super Rok, Maxter, Maranello, Iame, TM. Compatibility will shortly be extended to other valve types.Read more
* The sensor is currently compatible with Rotax-type valves, used by the following engines: Rotax, Super Rok, Maxter, Maranello, Iame, TM. Compatibility will shortly be extended to other valve types.Read more
KH035
Lambda Control Unit
LCU-One Lambda controller CAN allow you to perfectly tune the carburetion of your engine as well as keep it at its best, appreciably improving your kart performances.
All LCU-One lambda controllers use a wide band Bosch LSU 4.9 probe either for its capacity of saving the original calibration for its all life and for its duration: Bosch LSU 4.9 probe, in fact, has been designed to last for more than 100,000 km on a stock car.Read more
All LCU-One lambda controllers use a wide band Bosch LSU 4.9 probe either for its capacity of saving the original calibration for its all life and for its duration: Bosch LSU 4.9 probe, in fact, has been designed to last for more than 100,000 km on a stock car.Read more
KH040
Data Hub 4
The acquisition of all essential data you need to evaluate your car performance needs the connection of many peripherals to your datalogger. This implies the presence of a great number of cables. To solve this problem, AiM developed Data Hub, the new CAN connection multiplier that works as an interface between all AiM loggers and their peripheral equipments. Each Hub connects the logger with four peripherals: i.e. LCU lambda controller, GPS08 Module and one or more TC Hub (thermocouples multiplier).
Data Hub takes all the information you need to your logger with only one cable, minimizing wires overall.Read more
Data Hub takes all the information you need to your logger with only one cable, minimizing wires overall.Read more
KH041
Data Hub 2
The acquisition of all essential data you need to evaluate your car performance needs the connection of many peripherals to your datalogger. This implies the presence of a great number of cables. To solve this problem, AiM developed Data Hub, the new CAN connection multiplier that works as an interface between all AiM loggers and their peripheral equipments. Each Hub connects the logger with four peripherals: i.e. LCU lambda controller, GPS08 Module and one or more TC Hub (thermocouples multiplier).
Data Hub takes all the information you need to your logger with only one cable, minimizing wires overall.Read more
Data Hub takes all the information you need to your logger with only one cable, minimizing wires overall.Read more
